Leemone 360 2-in-1 H13 HEPA + Carbon Filter for Dyson TP/HP Review: Pros, Cons & Rumors Debunked

Leemone 360° Combi 2 in 1 HEPA+Carbon Replacement Filter Compatible with Dyson TP06 HP06 PH02 PH01 PH03 PH04 HP09 TP09 HP07 TP07 TP10 HP10, H13 Grade True HEPA Replacement Filter

• 360° 2-in-1 HEPA+Carbon replacement for Dyson TP06/HP06/PH01-04/TP09/HP09/TP10. H13 True HEPA captures 99.97% of particles ≥0.3µm; activated carbon reduces smoke, pet, and cooking odors.
• Easy 360° drop-in replacement (Part #970341-01) with H13 filter media and FSC charcoal carbon. Quick install — reset required. Fits Dyson Pure Cool/Hot+Cool/Humidify models listed.

Check the Price on Amazon

• Most customers report the Leemone 360° Combi 2‑in‑1 filter is a reliable, cost‑effective Dyson replacement; no widespread safety or fraud rumors appear in the supplied reviews.
• Common complaints are usability issues (fit/seal, the Dyson unit not auto‑recognizing the filter, and occasional temporary off‑gassing smell); these are inconvenient but not reported as dangerous.
• Quantitative signals in the reviews show strong positive sentiment for fit, functionality and value — negative flags are a minority and generally solvable by correct installation or seller support.
• If you require guaranteed OEM sensor integration or a brand warranty, buy Dyson OEM; if you want savings and accept small trade‑offs, Leemone is a reasonable third‑party option.

• Quick facts: this is a 360° combined HEPA + carbon replacement designed for many Dyson Pure Cool / Hot+Cool / Humidify+Cool models.
• Important compatibility warning is included by the seller — check your model number before ordering.

Product Overview — Leemone 360° Combi 2‑in‑1 HEPA + Carbon Replacement Filter

The Leemone 360° Combi replacement is marketed as a single‑piece 2‑in‑1 HEPA and activated carbon filter that fits multiple Dyson tower purifiers and hot/cool models (listed by the seller as PH01/PH02/PH03/PH04, TP06/TP07/TP09/TP10, HP06/HP07/HP09/HP10 and similar). The manufacturer states the media is H13 grade True HEPA, claiming 99.97% capture at 0.3 microns, and that the carbon layer is made from FSC‑certified charcoal powder for odor and VOC control. The product description also calls out a replacement part number (#970341‑01) and gives an important use note: if your previous Dyson filter used a removable mesh + carbon assembly, that older mesh/carbon must be removed before fitting this single combi piece. Installation instructions emphasize powering down the machine, placing the strap facing upward, and resetting the unit after installation so the purifier recognizes the replaced filter.

• Overall sentiment from the supplied reviews is predominantly positive for fit, functionality and value, with measured negative signals concentrated in a few recurring areas.
• Counts from reviewer summaries provide a transparent snapshot of what buyers praise and what they raise as concerns.

Leemone 360° Combi 2‑in‑1 Filter Review: Honest Findings — what the reviews actually show

Using the review summary you supplied, the patterns are clear: users mention “Fit” 63 times (48 positive / 15 negative), “Functionality” 54 times (46 positive / 8 negative), and “Value for money” 24 times (24 positive). Other categories (build quality, ease of installation, filter quality, smell and cleaning brush) show similar skews toward the positive. Put another way, for the most‑mentioned categories roughly 70–90% of customer comments are favorable — for example, functionality was positive ≈85% of the time (46/54) and fit was positive ≈76% (48/63). That indicates the majority experience is good, and negative mentions are not rare but are clearly in the minority. The negative themes that recur (and that we will analyze below) are: occasional fit/seal problems, cases where the Dyson device does not appear to auto‑recognize or reset the filter life counter, and some reports of a temporary funky or chemical smell after installation.

• Customers repeatedly praise fit, performance, price and the included cleaning brush; many say it performs like the original for a fraction of the cost.
• Positive sentiment is supported by the counts: functionality and fit are the most discussed topics and are mostly positive.

Positive Feedback & Highlights — what users like

The strongest, most consistent praise in the supplied reviews centers on three things: good fit and compatibility, perceived filter performance (HEPA capture and odor control), and clear value compared with OEM Dyson filters. Practical add‑ons such as an included 2‑in‑1 cleaning brush also earn positive mentions. Multiple buyers explicitly say that the filters “fit perfectly” in their Dyson PH01/PH02/PH03/PH04 and TP/HP models, noting no gaps and an installation feel comparable to the original Dyson parts. Value comments are straightforward — several reviews note they could buy two Leemone filters for the price of one Dyson filter and that the Leemone choice “saves a ton of money.”

Fit and compatibility — largely reliable

The data shows fit is the single most mentioned topic (63 mentions), and about three‑quarters of those are positive. Buyers appreciate that the replacement is 360° and plugs into the Dyson housing without fuss when their model is supported. The seller also provides a helpful compatibility list and an explicit model exclusion list — both are important checks before purchase.

Performance and odor control — effective for everyday use

Many customers report the combination of H13 media and activated carbon reduces pet odors, cooking fumes and general household smells. While independent lab verification is not present in the supplied data, customers’ home‑use impressions are consistent: the carbon layer is doing the intended job for routine odor sources.

Value and extras — good price for replacement filters

The included cleaning brush, lower price point, and reported durability are recurring positives. For consumers who change filters regularly or want to keep spares on hand, the cost savings are the main attraction.

• The repeat negatives are functional and usability issues, not safety or criminal complaints: fit mistakes, recognition/reset problems, and transient smells account for almost all adverse feedback.
• No supplied reviews allege dangerous emissions, product tampering, fires, or widespread counterfeit scams tied specifically to this Leemone listing.

Negative Reviews & Rumor Analysis — what to watch out for

The negative signals in the supplied review set fall into a handful of themes. None of these, as reported in the provided text, are framed as safety emergencies — they are usability, fit, or perception problems. The three recurring complaints are: (1) fit/seal problems for a minority of users; (2) the Dyson unit not recognizing the new filter or failing to reset the filter life indicator; and (3) a temporary funky or chemical smell after installation for some buyers. Each of these deserves practical context.

Fit & seal complaints — scope and severity

About 15 out of 63 fit mentions were negative — that is the largest single‑item negative count. These comments describe either a small gap or a rubber seal that did not align perfectly. In practical terms a minor gap could reduce filtration system efficiency slightly and might make the filter feel less snug, but the reviews do not report filters falling out, rapid device damage, or safety hazards. If you receive a unit that feels loose, the sensible course is to verify model compatibility again and contact the seller for an exchange — the manufacturer explicitly offers 24/7 support.

Filter recognition / indicator not resetting — why it happens

Some reviewers say the fan “doesn’t appear to recognize the new filters so indicators are still showing” after replacement. The product description warns users to reset the machine after installing the Leemone filter; failing to perform the reset (or not following the exact reset steps) will leave the purifier’s indicator in the “replacement due” state. In other cases, third‑party replacements might not have the same auto‑recognition behavior as OEM parts, so manual resetting is necessary. This is inconvenient but functionally separate from filtration performance — the device can still run and filter air; the dashboard indicator may simply be inaccurate until you perform the proper reset steps.

Smell / off‑gassing concerns — frequency and mitigation

Twelve reviewers mentioned smell; seven framed the carbon as helpful for household odors, while five reported a “funky smell” that persisted in one anecdote for up to a month. New filters with carbon and binder materials can emit a faint odor while packaging residues or volatile components dissipate — this is called off‑gassing. For many buyers the odor fades with a few hours to a few days of operation or by airing the filter out before installation. If a smell is strong or persists beyond a reasonable airing period, return or replacement is the prudent choice.

Build quality and longevity — buyer expectations

Build quality comments skew positive (15 positive vs 5 negative mentions), but negative reviewers sometimes compare the product unfavorably to Dyson OEM parts, especially the rubber seal finish. That’s a trade‑off frequently seen with third‑party replacements: you get a lower price but occasional differences in fit, finish and long‑term reliability. None of the supplied reviews allege catastrophic failure or device damage caused by the filter.

Rumor check — are there serious complaints, scams, or hazards?

Based on the supplied review data there are no serious safety complaints or widely repeated rumors alleging danger (no reports of fires, toxic emissions causing illness, intentional counterfeiting scams, or systemic device damage). The adverse comments are customer service or installation issues rather than consumer protection red flags. That said, the review set is a subset of user feedback and cannot substitute for exhaustive market surveillance — but within this dataset there is no sign of a hazardous product or a scam.

• Best suited to budget‑minded owners of compatible Dyson models who accept third‑party tradeoffs; avoid if you require perfect OEM integration or have severe chemical sensitivities.
• Follow the seller’s installation instructions exactly and be prepared to contact Leemone customer service or return the item if fit or smell is a problem.

Who Should Consider the Leemone 360° Combi Filter? — buyer guidance

This filter is a good match for several buyer profiles: (a) owners of supported Dyson models who want a less expensive replacement and who perform routine filter changes; (b) households with pets or cooking odors that will benefit from the activated carbon layer; and (c) shoppers who are comfortable troubleshooting the small usability issues that sometimes accompany third‑party parts (e.g., verifying fit, performing a manual reset, or airing the filter if it smells initially). If you are budget‑conscious and willing to accept a possible minor trade‑off in OEM fit or auto‑recognition, Leemone offers a compelling value. Conversely, if you rely on exact OEM sensor integration, manufacturer warranty coverage that requires genuine parts, or you have extreme sensitivity to smells/chemicals, then sticking with Dyson OEM cartridges is the safer option.

Practical pre‑purchase checklist

Before buying, confirm the model number stamped on your Dyson unit (the seller warns explicitly that this filter is NOT compatible with TP03/TP02/TP01, AM11, BP01, HP02, HP01, DP02, DP01). Plan to: (1) check the fit immediately upon delivery; (2) air the new filter in a ventilated area for 24–48 hours if you’re sensitive to odors; (3) follow the product’s installation note about the strap orientation and removing any older mesh + carbon parts; and (4) perform the purifier’s filter‑reset procedure or follow Leemone’s reset instructions in the package.

• Final verdict: a solid third‑party replacement with mainly positive user feedback and no evidence in the supplied reviews of any serious safety or scam concerns.
• Action steps: confirm model compatibility, follow installation/reset guidance, and use the seller’s return/support process if you encounter fit, smell or recognition issues.

Conclusion: Final Verdict — safe choice with caveats

Summing up the supplied review evidence: the Leemone 360° Combi 2‑in‑1 HEPA + Carbon replacement filter is generally well‑regarded for fit, filtration performance and value. The negative reports are concentrated in a minority of reviews and mostly involve usability (minor gaps or seal differences), the need to manually reset the Dyson indicator, and an occasional temporary odor on first use. Importantly, among the provided customer feedback there are no persistent allegations of dangerous emissions, fires, or consumer scam behavior tied to this listing. For buyers who want a lower‑cost, functional replacement and who will double‑check compatibility and follow the seller’s installation steps, this filter is a practical option. If you require strict OEM parity for device sensing, sleep best with an original Dyson part.

• If you buy: inspect the filter immediately, try an airing period to reduce any off‑gassing, and reset the purifier per instructions.
• If you have a problem: use Leemone’s customer support (seller promises 24/7 help) or Amazon returns — the issues reported in reviews are generally resolvable via replacement, return, or the reset/install steps above.

Leemone 360° Combi 2 in 1 HEPA+Carbon Replacement Filter Compatible with Dyson TP06 HP06 PH02 PH01 PH03 PH04 HP09 TP09 HP07 TP07 TP10 HP10, H13 Grade True HEPA Replacement Filter

• 360° 2-in-1 HEPA+Carbon replacement for Dyson TP06/HP06/PH01-04/TP09/HP09/TP10. H13 True HEPA captures 99.97% of particles ≥0.3µm; activated carbon reduces smoke, pet, and cooking odors.
• Easy 360° drop-in replacement (Part #970341-01) with H13 filter media and FSC charcoal carbon. Quick install — reset required. Fits Dyson Pure Cool/Hot+Cool/Humidify models listed.

Check the Price on Amazon